Single Girder EOT Cranes

Single Girder EOT Cranes


HERC single girder eot cranes are easy to maintain because of the modular design of HERCULES Hoists which makes it possible for the crane to be maintained in its installed position.

We have adjustable limit switches for our cranes and hoists of reputed makes.

HERC Cranes are load tested at 125% of the capacity at the site before being handed over to our clients.

SR. NO CAPACITY IN TONNES SPAN IN METRES HEAD ROOM CLEARANCEIN MM HRC END CLEARANCE IN MM ELS/ERS HOOK APPROACH IN MM HALS WHEEL BASE IN MM WHEEL LOAD OF CRANE INTONNES (Approx.) TOTAL WT OF CRANES IN TONNES (Approx.)
1 1 10 700 220 750 2000 0.5 1
15 800 220 750 2500 0.75 2
20 850 220 750 3000 1 3
2 2 5 800 250 750 2000 1 2
10 900 250 750 2500 1 2
15 1000 250 750 3000 1.5 4
20 1200 250 750 4000 1.75 5
3 3 5 800 250 850 2000 1.25 2
10 900 250 850 2500 1.5 3
15 1000 250 850 3000 1.75 4
20 1250 250 850 4000 2.5 7
4 5 10 950 250 950 2500 2 3
15 1200 250 950 3000 2.75 6
20 1300 250 950 4000 3.2 8
5 7.5 10 1000 250 1000 2500 3.4 6
15 1250 250 1000 3000 3.6 7
20 1400 250 1000 4000 4.12 9
6 10 10 1100 275 1100 2500 3.75 5
15 1350 275 1100 3000 4.5 8
20 1500 275 1100 4000 5 10
7 15 10 1200 300 1100 2500 5.5 7
15 1500 300 1100 3000 6.25 10
20 1600 300 1100 4000 6.75 12

Further Details:

HERCULES makes EOOT Cranes which are designed & manufactured as per IS: 3177 and IS: 4137 which is considered as as an adequate factor of safety with respect to appropriate duty classifications.The structural parts of the cranes are designed as per IS: 807.

Standard Features:

Herc single girder eot cranes are easy to maintain because of the modular design of Hercules Hoists which makes it possible for the crane to be maintained in its installed position.

We have adjustable limit switches for our cranes and hoists of reputed makes.

Hercules Cranes are load tested at 125% of the capacity at the site before being handed over to our clients.

Range of Specifications:

Safe Working Load: 250 kgs to 15,000 kgs

Span: 3 mtrs to 30 mtrs

Height of Lift: As per customer specifications

Class of Duty / Standards: Equivalent to M3,M4,M5, M6,M7, M8 as per IS 3177 / IS 807

Speeds: According to standard Hercules designed hoists. Please refer to our catalogue of hoists for further detailed specifications.

Crane Control: Pendant push button, can be cabin operated and we also provide our cranes with radio remoteb if needed by the client on extra charges with a range of 100 mtrs.

Drive System: Twin Drive through Squirrel Cage Induction motors with helical gear boxes for rugged use

Motors used in Herc are only of reputed makes, these are special S4 crane duty motors, with TEFC CLASS F insulation IP 55, with ambient temp 50 degree. These motors can be chosen differently to meet the client's requirements as well.

Brakes: HERC provides its single girder cranes with electro magnetic fail safe DC brakes for hoisting Cross Travel and Long Travel motions to avoid coil burnouts cutting down the maintenance cost and down time of EOT Crane, preventing the production to get hampered.

Power Supply System: To Hoist and Cross Travel through Trailing Cables / Drag Chain To Crane through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors / Bare Copper Conductors (depending on customer's choice and application)

Our single girder cranes are available in 2 types -

A. Single Beam Girder EOT Cranes

B. Single Box Girder EOT Cranes

Enquiry